Leisurely Cheers Bar DIY Miniature House Kit

Name: Leisurely Cheers Bar DIY Miniature House Kit
Brand: Rolife
SKU: DW012
Price: 232.00 RON
Availability: OutOfStock

232,00 lei

Taxes included. Shipping calculated at checkout.

Out of stock

Leisurely Cheers Bar is a corner-format DIY miniature house with two fixed walls and an open front, built from 142 pieces at 1:24 scale. It belongs to Rolife Super Creator series, where every room carries edge connectors and stacks with other rooms into L-shaped or grid layouts. The scene includes LED lighting.

Brand: Rolife

Assembly Time: 1h

Difficulty Level: ★★☆☆☆ - Easy

LED Lighting: Yes

Number of Pieces: 142

Recommended age group: 14+

Scale: 1:24

Assembled size: 163x163x152 mm

Available shipping destinations, costs and expected delivery dates are shown at checkout before payment. For country-specific shipping information, please see our Shipping Policy.

Returns are accepted within 30 calendar days of delivery. Return shipping is free and arranged by My Hobby Day with a prepaid return label after you notify us. Full terms and instructions are available in our Refund Policy.

Guaranteed Safe Checkout

142

Number of pieces

1h

Assembly time

★★☆☆☆ - Easy

Difficulty level

163x163x152 mm

Assembled size

Leisurely Cheers Bar Roombox Kit at a Glance

Assembled, this is one open-fronted room on a solid base: two walls at a right angle, a plank floor, a bar run along one side and a seating corner along the other. Parts come out of the box already colored and snap together by hand, so the job comes down to matching a numbered part to a numbered step and pressing it home. The pace stays even, with no cutting, no glue and no drying gaps, and the only slow moments are the loose props, which are small enough to want tweezers. Among Rolife kits this sits near the bottom of the effort scale, closer to one sitting than to a weekend project.

Bar Zone

Counter Setup and Seating Corner

The scene reads as a small cocktail bar rather than a pub or a coffee counter. The counter zone runs along the left wall: a bar with recessed cabinet fronts, a twin-tap beer tower and a shaker set on top, two turned-leg stools with round padded seats tucked underneath, and two narrow wall shelves above carrying bottles and stemware. The seating zone takes the right wall: a low armchair with buttoned tufting and squared arms, a pedestal cafe table at chair height, and a bottle crate beside it. A tall glass-front wine cabinet with an openable door and four racks stands where the two zones meet. Printed detail fills the walls, including a chalkboard listing dry martini, margarita, mojito and bloody mary, framed drink posters and raised Rolife Bar lettering.

Assembly Load

142 Pieces at Level 2 of 5

Rolife marks the model 14+ and rates it two stars out of five, and the quoted hour is realistic for anyone who has done a snap-fit kit before. Parts arrive pre-molded and pre-colored, numbered to the manual, and join by push-fit sockets, so nothing needs trimming, sanding or glue. The structure goes fast: base, floor and walls take a few minutes each and lock square on their own. Time goes into the small stuff instead, mainly seating the wine cabinet door on its hinge and standing the bottles, glasses and bar props on narrow surfaces without knocking the last one over. Against the wooden Rolife kits, which run to hundreds of laser-cut parts, this is a starter-level build.

Overhead Light

Light Placement and Coverage

One warm light works from above the room, so the counter side takes most of it: the filled beer mugs, the row of stemware on the wall shelf and the glazed door of the wine cabinet are the parts that change. Clear plastic needs light above or behind it to register, and lit from overhead those pieces stop reading as flat molding. With the front open, the spill runs wide instead of staying over the bar, so the floor planks pick up the tone and the seating corner comes out of shadow. Left off, the same room reads as a plain daytime scene.

Material Spec

ABS, PVC and Printed Paper

Rolife lists three materials for the model: ABS, PVC and paper. The two plastics cover everything you handle, from the room shell and the counter to the furniture and the props on the bar, and they come out of the box in their finished colors, so there is no painting stage and no color that can be rubbed off during assembly. Paper handles the printed work: the wall graphics, the chalkboard menu, the framed posters and the bottle labels are printed sheets applied to plastic panels rather than molded relief. The same split explains the storage difference against plywood-and-cardstock kits, since nothing here swells or warps in a humid room.

Shelf Footprint

Assembled Size, Stacking and Gift Use

Assembled it measures 163 x 163 x 152 mm, roughly 6.4 x 6.4 x 6 inches, which clears a standard bookshelf and takes a desk corner without pushing anything else aside. As decor it belongs at eye level or below, because the room is open at the front and top and is made to be looked into rather than at. The connectors on the base and the side walls accept other Super Creator rooms, so one Rolife miniature house can grow into an L-shape or a four-square block later on. As a gift the bar theme suits an anniversary for a couple who host at home, and an hour of assembly means it gets built the same evening rather than shelved.